Autovia
limousine by Arthur Mulliner EYX 464 registered September 1938
Overview
Manufacturer	Autovia Cars Limited, Ordnance Works, Midland Road, Foleshill, Coventry CV6 5DX
Production	1937-1938 public sales starting 1936 44 made
Designer	Charles Van Eugen (1890-1980)
Body and chassis
Class	Large luxury
Body style	chassis 4-light sports saloon 6-light saloon limousine
Layout	Front engine rear wheel drive
Related	(engine) Riley 1½-litre straight 4 and Riley 8/90 2¼-litre 90°V8
Powertrain
Engine	2,849 cubic centimetres (174 cu in) 90°V-8
Transmission	single dry-plate clutch to a 4-speed manual gearbox with synchromesh on all speeds or automatic clutch and 4-speed preselective gearbox divided propellor shaft, back section in a torque tube final drive by underhung worm is housed in a banjo-type casing
Dimensions
Wheelbase	129 in (3,300 mm)
Length	175.5 in (4,460 mm) or 183 in (4,600 mm) Track 56.5 in (1,440 mm)
Width	71 in (1,800 mm)
Chronology
Predecessor	none
Successor	none

 

EYX 464 around 1963
No higher resolution available

Autovia was a short lived brand of British car from Coventry existing from 1935 to 1938 with production starting in January 1937.

The venture was ambitious and even included setting up a school for chauffeurs. The cars were expensive and it was a market sector well served by other companies. 44 cars were made.

Large luxury cars

The company was created by Riley as a subsidiary to produce large luxury cars and a new factory was built. A 2849 cc 90°V-8, triple camshaft engine was developed from a pair of 1½-litre Riley engine blocks and coupled to a pre selector unit bought from Armstrong Siddeley. One car was fitted withed a zf 4 speed manual box, Drive was to the rear wheels through a live axle with worm gear final drive.

Three body types were advertised, a Sports saloon, a Special Saloon with extra leg room at the expense of boot space and a limousine mostly built by Arthur Mulliner of Northampton who were London distributors. The car was also available as a bare chassis.

The venture failed when Riley went bankrupt. When they were taken over by the Nuffield Organisation Autovia was not resurrected.

There were thought to be eight of these cars remaining in 2008.

The limousine was considered remarkable for its width being more than its overall height yet the floors were flat and a tunnel and wells avoided at the back. "The general low set helps stability" said The Times, "the models are well equipped, as they should be for the price".

Open two-seater originally a saloon registered September 1939

Specification

The specially designed chassis frame permits a low overall height and low floor line.
In addition to the details in the adjacent box:

• wheels: Dunlop centre-lock wire 3.50" x 19" with nave plates
• tyres: 5.5" section on 19 inch wheels
• suspension by semi-elliptic springs from the two rigid axles is controlled by hydraulic shock absorbers, their resistance is controlled by the driver
• braking on all four wheels is mechanically actuated by rods with wedge operated shoes in 16 inch drums
• steering by worm and nut
• lubrication (of chassis items) is centralised and automatic

Pricing

In a prior announcement 10 October 1936 Victor Riley revealed there would be two models available in addition to the bare chassis all with an automatic clutch, a preselective gearbox and a worm driven back axle. Prices would be:

• chassis £685
• five-seat saloon £975
• limousine £995

The London distributors were Arthur Mulliner Limited of 54 Baker Street.