Description
Polar Blast is a snow foam that may be applied through a pressure washer or foam gun. It covers the vehicle in a Wealthy blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling. The usage of a snow foam as a pre-wash can reduce the risk of scratches and swirls as it gently loosens dirt which is then rinsed off prior to shampooing. Polar Blast is pH neutral so it’ll not dispose of any polish or wax you have in the past applied. How to use this product 1. Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight. 2.Polar Blast can be utilized at quite a lot of dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam. 3. Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels. 4. Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, even supposing do not allow it dry on. 5. After all, rinse thoroughly from the bottom up.
Wealthy snow foam with superior cling
Apply through a pressure washer or foam gun
Loosens dirt and contamination
pH neutral
Use as a pre-wash to reduce the risk of scratches & swirls
